Welcome to SR-Modellsport

5% opening discount

SR2025

Zenoah G270RC3 engine 25.4cc (without clutch, filter, resonator)

Zenoah  |  SKU: ZG270RC3
Regular price €280,00
Tax included Shipping calculated at checkout.

Description

The new Zenoah G270RC is the further development of the G260RC3. Despite the new G270 designation, the displacement has not changed compared to the previous Zenoah G260RC engine and remains at 26cc! The engine's installation dimensions are identical to the previous model, so no additional parts are required for replacement!

The following changes were made to the new Zenoah G270RC3:
- Fastening the cylinder to the crankcase with 4 screws
- Crankcase reinforced
- Third ball bearing for the crankshaft, mounted on the clutch side
- new cooling fin design
- Inlet channel 5% wider
- Carburettor WT-990 with accelerator pump, without choke
- Metal insulator seal


Technical data:

Model G270RC
type 2-stroke piston engine
cooling Air cooling
Bore x stroke 34 x 28mm
Engine capacity (cm³) 25.4 cc
Max. power HP  2.52 hp @ 12,000 rpm
Max. torque  1.63Nm@9000 rpm
Direction of rotation Counterclockwise (viewed from the PTO shaft)
fuel 25:1 gasoline (min. 91 octane) / oil premix
compression 8.9:1
lubricant High-quality 2-stroke engine oil
carburetor WT-990 diaphragm carburettor, flap valve
ignition TCI
spark plug NGK-CMR7H
Starting pull starter
Air filter Dry
length 167 mm
Width 205 mm
Height 196 mm
Weight  2100g
coupling No
clutch spring No

Person responsible according to GPSR / person responsible GPSR

Robitronic Electronic Ges.mbH
Pfarrgasse 50, 1230 Vienna
AUT
https://shop.robitronic.com/
esales@robitronic.com

Manufacturer

FUJIWARA Co., Ltd.,

150-2 Kitado, Minabe-cho, Hidaka-gun, Wakayama 645-0006, Japan,

Phone: +81-739-34-5131,

https://fujiwaraltd.com/hobby-engines

Danger

Keep away from small children under 36 months as it may contain small parts and sharp objects that can be swallowed (risk of suffocation).

Not suitable for children under 14 years of age. Use only under direct adult supervision.

The product must not be disposed of with household waste but must be returned to the manufacturer or a collection point such as a recycling center.